MKT anchor bolt B 12-15-30/110 stainless steel A4

Approved B anchor, A4 and B HCR anchors with European technical assessment, option 7, in concrete without cracks for installations for pre-assembly and installation through the fastening element that save time.
Suitable for indoor and outdoor use.
The B HCR anchor can also be used in particularly aggressive environmental conditions such as those found in public swimming pools, in road tunnels or in contact with seawater.
Thanks to the option of installation with three anchoring depths, it flexibly adapts to the corresponding installation requirements.
With minimal anchoring depth, drilling and installation time are reduced, as well as the likelihood of drilling into reinforcement.
When using vacuum drills, there is also no need to blow out the hole.
In size M6, B A4 and B HCR anchors have an anchoring depth of only 30 mm with European technical approval for multiple anchoring and therefore can be used for suspended ceilings and other hanging elements.

Advantages

- Approved for use in concrete without cracks (option 7.)
- Very high allowable loads and small edge and axial spacings
- Three anchoring depths for optimal flexibility
- Installation with minimal anchoring depth saves drilling and installation time
- Installation with maximum anchoring depth for the highest allowable loads
- Suitable for pre-assembly and installation through the fastening element
- Particularly economical: short versions with minimal anchoring depths
- Tested for fire resistance F30-F120
- FM approval for installation of sprinkler systems (M10 to M16)
- Diameter M6 (hef > 30 mm) approved for a group of anchor bolts
- Impact end prevents thread damage during installation into the hole


Application
Medium to heavy loads in zatv