MKT anchor bolt B 8-20-29/85 stainless steel A4

Approved B anchor, A4 and B HCR anchors with European technical assessment, option 7., in non-cracked concrete for installations for pre-assembly and installation through the fastening element that save time.
Suitable for indoor and outdoor use.
The B HCR anchor can also be used in particularly aggressive environmental conditions such as those that occur in public pools, in road tunnels or in contact with seawater.
Thanks to the possibility of installation with three anchorage depths, it flexibly adapts to the respective installation requirements.
With minimal anchorage depths, drilling and assembly time is reduced, as is the possibility of drilling reinforcement.
When using vacuum drill bits, there is also no need to blow out the borehole.
In size M6, B A4 and B HCR anchors have an anchorage depth of only 30 mm with European technical approval for multiple anchoring and therefore can be used for suspended ceilings and other hanging elements.

Advantages

- Approved for use in non-cracked concrete (option 7.)
- Very high allowable loads and small edge and axial spacings
- Three anchorage depths for optimal flexibility
- Installation with minimal anchorage depth saves drilling and assembly time
- Installation with maximum anchorage depth for highest allowable loads
- Suitable for pre-assembly and installation through the fastening element
- Particularly economical: short versions with minimal anchorage depths
- Fire tested F30-F120
- FM approval for installation of sprinkler systems (M10 to M16)
- Diameter M6 (hef > 30 mm) approved for groups of anchor bolts
- Impact end prevents thread damage during installation into the borehole


Application
Medium to heavy loads in zatv