MKT two-component cartridge VM-U plus 280 ml

The VMU plus injection system is a universal injection system for installation in virtually all substrates.

In addition to anchoring in non-cracked concrete and masonry substrates, anchoring is also approved in cracked concrete and for post-installed reinforcement.
The approval (ETA-13/0909) for masonry structures also covers 6 different diameters of perforated meshes up to 200 mm in length, approved for 15 different types of substrates.
As fastening elements, MKT products, threaded rods as well as internally threaded sleeves (VMU-A, VMU-IG, VM-A and V-A), as well as conventional threaded rods and reinforcing bars can be used.

In hollow substrates the use of perforated meshes is mandatory.

Advantages
- Approved for cracked and non-cracked concrete
- Approved for: aerated concrete, solid and hollow bricks
- Approved for post-installed reinforcement (Ø8–Ø32)1)
- Approved for V-A and VMU-A threaded rods and threaded rods with a 3.1 certificate, as well as for internally threaded anchors VMU-IG and meshes VM-SH
- Approved for use in seismic conditions with performance category C1
- Only one mix for almost all applications, providing greater flexibility, fewer tools, and increased application safety
- Different anchoring depths for optimal adaptation to the desired installation
- Approved for anchoring in damp drill holes
- Approved for anchoring in water-filled drill holes (threaded rods from M8 to M16, internally threaded anchors IG from M6 to M10 and reinforcing bars with diameters from 8 to 16mm.
- Fire protection approval for all sizes
- Substrate temperature during installation for VMU plus -10°C to +40°C
- Once-used cartridges can be subsequently reused with the application of a new static mixer
- Two-component vinyl ester-based mixture, styrene-free