MKT VM-U plus 280 ml, 20 pcs. in case

MKT VM-U plus 280 ml, 20 pieces in a case

The VMU plus injection system is a universal injection system for installation in almost all substrates.

In addition to anchoring in non-cracked concrete and masonry substrates, anchoring in cracked concrete is also approved, as well as for post-installation of reinforcement.
Approval (ETA-13/0909) for masonry structures also covers 6 different diameters of perforated meshes with lengths up to 200 mm, approved for 15 different types of substrates.
As fixings, MKT products, threaded rods as well as sleeves with internal thread (VMU-A, VMU-IG, VM-A and V-A), as well as conventional threaded and reinforcement bars can be used.

In hollow substrates the use of perforated meshes is mandatory.

Advantages
- Approved for cracked and non-cracked concrete
- Approved for: aerated concrete, solid and hollow bricks
- Approved for post-installation of reinforcement (O8-O32)1)
- Approved for threaded rods V-A, VMU-A and threaded rods with 3.1 certificate as well as for internally threaded anchors VMU-IG and meshes VM-SH
- Approved for use in seismic conditions performance category C1
- Only one mixture for almost all applications, provides greater flexibility, fewer tools, greater application safety
- Different anchoring depths for optimal adjustment to the desired installation
- Approved for anchoring in damp drilled holes
- Approved for anchoring in water-filled drilled holes (threaded rods from M8 to M16, internally threaded anchors IG from M6 to M10 and reinforcement bars with diameters from 8 to 16mm.
- Fire approval for all sizes
- Substrate temperature during installation for VMU plus -10°C to +40°C
- Once-used cartridges can be subsequently used with the use of new static mixers
- Two-component mix