MKT VMU plus 410 two-component cartridge

The VMU plus injection system is a universal injection system for installation in almost all substrates.

In addition to anchoring in non-cracked concrete and masonry substrates, anchoring in cracked concrete and for subsequent installation of reinforcement is also approved.
The approval (ETA-13/0909) for masonry constructions also covers 6 different diameters of perforated meshes with lengths up to 200 mm, approved for 15 different types of substrates.
As fastening elements, MKT products, threaded rods and sleeves with internal thread (VMU-A, VMU-IG, VM-A and V-A) can be used, as well as conventional threaded and reinforcement rods.

In hollow substrates the use of perforated meshes is mandatory.

Advantages
- Approved for cracked and non-cracked concrete
- Approved for: aerated concrete, solid and hollow bricks
- Approved for subsequent installation of reinforcement (O8-O32)1)
- Approved for threaded rods V-A, VMU-A and threaded rods with 3.1 certificate as well as for anchors with internal thread VMU-IG and meshes VM-SH
- Approved for use in seismic conditions performance category C1
- Only one mixture for almost all applications, provides greater flexibility, less tooling, greater application safety
- Different anchoring depths for optimal adaptation to the desired installation
- Approved for anchoring in damp drill holes
- Approved for anchoring in water-filled drill holes (threaded rods from M8 to M16, anchors with internal thread IG from M6 to M10 and reinforcement rods with diameters from 8 to 16mm.
- Fire protection approval for all sizes
- Substrate temperature during installation for VMU plus -10°C to +40°C
- Once-used cartridges can be reused later with the application of new static mixers
- Two-component mixture based on vinyl esters without styrene