Galvanized threaded rod DIN 976-1 (DIN 975) – 1 m

Galvanized threaded rod DIN 976-1 with a length of 1 meter (1000 mm) is a universal connecting element with a metric thread along the entire length. It is made of steel of strength class 4.8 and is galvanically zinc-plated, providing protection against corrosion in dry and indoor environments.

Thanks to the full-length thread, the 1 m threaded rod can be easily shortened to the required length. It is a practical solution for connections where a standard bolt is not long enough. It is used in assembly, construction, installation work, fabrication of brackets and various suspension systems.

Applications of the galvanized threaded rod

The galvanized threaded rod DIN 976-1 is suitable for various assembly and construction applications. It is most commonly used for:

• suspension of installations and installation channels,
• assembly of cable trays and supports,
• installation of suspended ceilings,
• installation with chemical and mechanical anchors,
• joining wooden and metal structures,
• fabrication of brackets, clamps and spacers,
• extending threaded connections using coupling nuts.

Technical characteristics

Threaded rods M6, M8, M10, M12, M14, M16 and M20

The threaded rod is available in various diameters to accommodate different installation requirements. Depending on the needed size, versions M6, M8, M10, M12, M14, M16 and M20 are available. When selecting, the threaded rod size must be matched with the appropriate nut, washer and other fasteners.

Recommended additional accessories

For correct installation of the galvanized threaded rod we recommend using the appropriate connecting accessories:

• hexagon nuts DIN 934,
• washers DIN 125,
• coupling nuts DIN 6334 for joining or extending threaded rods.

The size of the nut and washer must correspond to the thread size of the threaded rod. For example, for a M10 threaded rod use an M10 nut and the corresponding M10 washer.