Zinc-plated threaded rod DIN 976-1 (DIN 975) – 1 m

Zinc-plated threaded rod DIN 976-1 with a length of 1 meter (1000 mm) is a universal connecting element with a metric thread along the entire length. It is made of steel of strength class 4.8 and is electro-galvanized, which protects it against corrosion in dry and indoor environments.

Thanks to the full-length thread, the 1 m threaded rod can be easily cut to the required length. It is a practical solution for joints where a standard bolt is not long enough. It is used in assembly, construction, installation work, fabrication of supports and various suspension systems.

Application of the zinc-plated threaded rod

The zinc-plated threaded rod DIN 976-1 is suitable for various assembly and structural applications. It is most commonly used for:

• suspension of installations and cable trays,
• installation of cable ladders and supports,
• construction of suspended ceilings,
• installation with chemical and mechanical anchors,
• joining wooden and metal structures,
• fabrication of brackets, clamps and spacers,
• extending threaded joints using coupling nuts.

Technical characteristics

Threaded rods M6, M8, M10, M12, M14, M16 and M20

The threaded rod is available in various diameters to accommodate different installation requirements. Depending on the required size, versions M6, M8, M10, M12, M14, M16 and M20 are available. When selecting, the threaded rod size must be matched with the corresponding nut, washer and other fastening elements.

Recommended accessories

For correct installation of the zinc-plated threaded rod we recommend using appropriate fastening accessories:

• hex nuts DIN 934,
• washers DIN 125,
• coupling nuts DIN 6334 for joining or extending threaded rods.

The size of the nut and washer must correspond to the thread size of the threaded rod. For example, for an M10 threaded rod use an M10 nut and the corresponding M10 washer.