TYTAN PROFESSIONAL Thin-layer PU adhesive for masonry pak=870 ml

Tytan TY PU Masonry

Tytan TY PU Masonry is a high-quality polyurethane adhesive designed for fast, simple and precise masonry of construction blocks. It represents a modern replacement for traditional mortars and enables significantly faster execution of construction works with clean and neat joints. It is an ideal choice for professional contractors as well as private users seeking a reliable solution for masonry and bonding of various building elements.

The product is specially designed for bonding aerated concrete blocks, ceramic blocks, silicate elements and other building materials. Thanks to excellent adhesion and rapid initial strength it enables efficient work with lower material consumption and less waste on the construction site.

Main advantages:

• Faster execution of work compared to traditional mortar
• Easy and precise application using a PU gun
• Very good adhesion to construction materials
• Reduces thermal bridges between blocks
• Clean work without mixing mortar and additional water
• High efficiency and lower material consumption
• Suitable for indoor and outdoor use
• Resistance to moisture and temperature changes
• Rapid curing and high bond stability

Application:

Tytan TY PU Masonry is used for building load-bearing and non-load-bearing walls, partition walls, garages, outbuildings and for various construction and renovation works. It is suitable for bonding:

• Aerated concrete blocks
• Ceramic blocks
• Silicate blocks
• Concrete elements
• Partition building systems

Directions for use:

Before use, surfaces must be clean, dry and free of dust or grease. The cartridge is placed on the PU gun and the adhesive is applied in strips onto the surface of the block. After application, the elements must be joined within the recommended working time. For optimal results it is recommended to work at appropriate temperatures according to the manufacturer's instructions.

FAQ – Frequently Asked Questions

Can TY PU Masonry replace traditional mortar?

Yes, the product was developed as a modern alternative to traditional mortar for masonry of certain types of blocks and building elements.

For which materials is the product intended?

It is intended for aerated concrete, ceramic blocks, silicate blocks and other standard building elements.

Can it be used outdoors?

Yes, the product is suitable for indoor and outdoor use when used correctly according to the manufacturer's technical instructions.

How quickly does the adhesive cure?

Curing time depends on temperature and humidity, but the product enables very fast initial setting of elements.

Is water or additional mixing needed?

No, the product is ready to use and is applied directly with a PU gun.

What are the main advantages compared to traditional masonry?

Faster execution of work, a cleaner construction site, reduced material consumption, better thermal insulation of joints and easier application.